How to debug a machine,everbody will want to know the answer who have bought a machine. Then let's get the list steps to debug a strainghtener of kingjime company.
1.Start the straightener or Decoiler，send out the material slowly.

2.Press the button of straightening roller rising or down to adjust the space between the up roller and the down roller, and last, debugging accurately in manual operation.

3.The function of air hold down spiring is pressing the up roller,make the up roller to press and send out the materials,so the pressure should make sure the materials not slippery.

4.According to the actual situation, Setting the feed length, corresponding set feeding speed, the setting method will be introduced in detail at the back.

5.According to approximate number,the real length of feeding is not the same as the setting number after setting the parameter,so we had to adjust to the real length of feeding in manual operation on the basis of feeding test , punch  procedure, stamping.

6.When in the mould guide pin tips into guide pin hole, can be adjusted to relax screw to encounter relax in support of bearing, relax until materials so far, and will screw nut lock (pneumatic relaxed tape feeder, should be adjusted so relaxed, that is the point of view of ± 15 °)

7.The adjustment of the feeding started by rotary CAM of punch, the so-called feed signal, which is to be to punch of the Angle of crankshaft. the Angle of the feeding is 9 to 3 points (240 °-90°)

8.After completed the set, we should try one mould to stamping, After shaking down the set ,we can continuous production.

if you have any questiones,please feel free to sent email to us,we will do our best to help you with your questiones.